Bluetooth Module Apply to Printer
1. Introduction
Printers are widely used in various fields such as instrumentation, utility meter reading, supermarkets, mobile police systems, convenience stores, mobile government affairs systems, postal services, handheld devices, restaurants, etc. As a short-range wireless communication protocol, Bluetooth technology has Low cost, low power consumption, high speed, convenient and flexible features, very suitable for printer products.
Figure 1
Figure 1 shows the overall block diagram of a Bluetooth printer solution:
1) Bluetooth host devices (such as mobile phones, PADs, computers, etc.) to search and connect Bluetooth slave module by wireless communication to establish transparent transmission serial port communication channel.
2) The slave module data transmit to the printer motherboard MCU, printer driver to execute the print job
2. Bluetooth module introduction
Figure 2
Figure 2 is the module designed by Shenzhen Feasycom Technology Co., Ltd. It is an embedded bluetooth serial communication dual mode module, connect with the bluetooth master chip via the UART serial port , it can achieve wireless data transmission between Bluetooth host device (mobile phone or computer, etc.) and the printer device.
Power on the FSC-BT826 module and enter into command mode, it can modify the corresponding parameters according to the instruction manual, such as Bluetooth name, baud rate, pairing code. In the printer application, as a slave, other bluetooth devices (such as mobile phones, PAD, computers, etc.) can search for this Bluetooth module, set up a connection and data transmission, after the successful connection, Bluetooth module and the printer enter into the transparent mode.
3. Bluetooth module application diagram
4. Pin instructions
Table 1
Pin No. | Pin Name | Pin Descriptions |
1 | UART-TX | UART data output |
2 | UART-RX | UART data input |
3 | UART-CTS | UART clear to send active low |
4 | UART-RTS | UART request to send active low |
11 | RESET | Reset if low. Input debounced so must be lo for >5ms to cause a reset. |
12 | VDD-3V3 | Power supply voltage 3.3V |
13 | GND | Power Ground |
32 | PIO9 | Programmable input/output line Alternative Function: LED(Default) |
33 | PIO10 | Programmable input/output line Alternative Function: BT Status(Default) |
Shenzhen Feasycom Technology Co., Ltd. has its own protocol stack for the printer industry and launched different modules to meet customers’ demands, it can support not only Bluetooth 2.0 / 3.0 protocols or Bluetooth 4.0 BLE protocol single-mode module, but also Bluetooth 2.0 / 3.0 protocol and Bluetooth 4.0 BLE dual-mode module, the main products are as Table 2:
Table 2
Module | Details |
FSC-BT426 | V2.0 single mode module ,support V2.0/3.0 SPP |
FSC-BT626 | V4.0 single mode module,support V 4.0 BLE |
FSC-BT522 | Dual mode module,support v2.0/3.0 and 4.0 BLE, simultaneous support for multiple Android phones connect with multiple APP and one Apple mobile with multiple APP printing |
FSC-BT826 | Dual mode module,support Bluetooth v2.0/3.0and v4.0 BLE,supports one Android phone and one Apple phone printing |