How To Use AT Commands To Control Bluetooth Modules Via Feasyblue APP?

- Sep 26, 2019-


How to use AT Commands with Smart Phones. Today Feasycom will get you out of the mist.

First of all, we need to download ''Feasyblue'' APP. (We could get this App from both Appstore or Google Play)

Second, we could go through the following steps to get works done:

a) Connect the module with feasyblue.
b) Send ‘$OpenFscAtEngine$’ to the module, then you will get ‘$OK,Opened$‘. It means that you’ve got access to the developer mode.
c) Send any AT commands, and after typing the AT command, turn the HEX mode on, adding ‘0D 0A’ to the end of the string.(See the reference photos below)
d) Turn the HEX mode off, and then send out the command. 
e) And now the AT command will work the same as using PC serial tool.
Please note: Every time you need to send an AT command to the module, you have to go through c) & d), otherwise it might not work.

Stap (1)
Stap (2)Stap (3)
Stap (4)Stap (5)Stap (6)














For more details ,feel free to Contact Feasycom .